
T300 Ferrari GTE
Product number : 2960760
Warning
- On PC, the USB sliding switch on the T300 RS & T150 racing wheel’s base must always be set to the PS3 position!
- Your wheel’s Firmware version appears in the top right in the Control Panel’s tabs. Firmware: 29 is the latest version.
- Attaching the pedal set to a cockpit :
- Attach the pedal set using the small threaded holes located beneath it.
- Drive two M6 screws (not included) through the cockpit shelf, then feed them into the two small threaded holes located beneath the pedal set.
Important : The length of the M6 screws should not exceed the thickness of the shelf +10 mm; longer screws could cause damage to internal components located in the pedal set.
Read more - Attaching the racing wheel's base to a cockpit :
- Place the racing wheel's base on the cockpit shelf.
- Drive two M6 screws (not included) through the cockpit shelf, then feed them into the two small threaded holes located beneath the racing wheel.
Important : The length of the M6 screws should not exceed the thickness of the shelf + 12 mm
Read more
Manual
![]() | User manual - T300 Ferrari GTE | PC PS3™ PS4™ |
![]() | User manual - T300 Ferrari Integral Alcantara® Edition | PC PS3™ PS4™ |
![]() | User manual - T300RS | PC PS3™ PS4™ |
![]() | Template - Cockpit setup - T300 RW Base Template | PC PS3™ PS4™ |
![]() | Template - Cockpit setup - Thrustmaster 2 pedals |
![]() | Tips - Cockpit setup - Thrustmaster 2 pedals | English |
Drivers
![]() |
DRIVERS FORCE FEEDBACK (Package 2019_TTRS_1) + Firmware | PC | Windows 10 - Windows 7 - Windows 8 | |
Release notes | Windows 10 - Windows 7 - Windows 8 |
Firmware
![]() |
Firmware T300 series - Update Procedure | PC PS3™ PS4™ |
Buttons mapping
![]() | Button mapping - T300RS | PC PS3™ PS4™ |
-
FERRARI 458 CHALLENGE WHEEL - PlayStation® GENERIC MAPPING -
FERRARI 458 CHALLENGE WHEEL - “PC” GENERIC MAPPING -
FERRARI 599XX EVO 30 ALCANTARA® WHEEL - PlayStation® GENERIC MAPPING -
FERRARI 599XX EVO 30 ALCANTARA® WHEEL - “PC” GENERIC MAPPING -
FERRARI F1 WHEEL - PlayStation® GENERIC MAPPING -
FERRARI F1 WHEEL - “PC” ADVANCED MAPPING -
FERRARI F1 WHEEL - “PC” GENERIC MAPPING -
GT WHEEL - PlayStation® GENERIC MAPPING -
GT WHEEL - “PC” GENERIC MAPPING -
TM LEATHER 28 GT WHEEL - PlayStation® GENERIC MAPPING -
TM LEATHER 28 GT WHEEL - “PC” GENERIC MAPPING
Games settings
FAQ
• Checking and, if necessary, reconfiguring the racing wheel’s center value - T-300/T-500 PC PS3™ PS4™ • COCKPIT ASSEMBLY RECOMMENDATIONS PC PS4™ Xbox One™ • How can i verify the T300 RS / T300 Ferrari GTE is correctly installed on my computer? PC PS3™ PS4™ • How to wake your racing wheel if it is no longer recognized on playstation®3, playstation®4 or pc - T300 Series (i.e. in the event of firmware loss) PC PS3™ PS4™ • Instructions on how to manually change the wheel's angle of rotation on playstation®3/playstation®4 in force feedback games. PC PS3™ PS4™ • Note regarding cooling fan operation and motor cooling on T300 PC PS3™ PS4™ • On pc, the usb selector switch on the t300 rs racing wheel’s base must always be set to the \'PS3\' position! PC • Two important remarks to avoid some force feedback or calibration issues in playstation®4 games PC PS4™
Licenses
![]() |
Immersion® - Incorporates sofware licensed from Immersion Corporation. |
![]() |
Produced under license of Ferrari Brand S.p.A. The name FERRARI, the PRANCING HORSE device, all associated logos and distinctive designs are property of Ferrari S.p.A. The body designs of the Ferrari cars are protected as Ferrari S.p.A. property under design, trademark and trade dress regulations. |
Knowledge base
-
Force Feedback settings explanation
1559
1
3
20-03-2017 - CONSTANT: A constant force will keep the same level in time. When a game decides to apply a force of x% of what the wheel can do, the "Constant" will keep that force at the same level. Exa... -
Manual firmware update procedure (Windows 7 / 8 / 8.1 / 10)
1006
0
0
28-09-2018 - On PC, the USB sliding switch on the T300 racing wheel’s base must always be set to the PS3 position! 1) Install the drivers “PC - DRIVERS FORCE FEEDBACK”: https://support.thrus... -
Instructions on how to manually change the wheel's angle of rotation on PlayStation®3/PlayStation®4 in Force Feedback games.
897
1
0
13-07-2018 - The T300 / T150 racing wheel and the relevant SDK (Software Development Kit) are issued to major PlayStation®3/PlayStation®4 game development studios to ensure full compatibility with fort... -
BOOTLOADER METHOD: how to wake your racing wheel if it is no longer recognized on PlayStation®3, PlayStation®4 or PC
797
0
2
03-09-2018 - Required system: PC running Windows® 7,8 or 10. On PC, the USB sliding switch on the T300 RS racing wheel’s base must always be set to the PS3 position! 1) If you haven’t already do... -
My T300 wheel is detected as "FFB Racing Wheel" by my PC
559
1
0
20-03-2017 - The T300 racing wheel can sometimes be detected by the PC as "FFB Racing Wheel" instead of "T300 RS" (in the Game Controllers panel). This situation can have several causes: the wheel's platfo... -
AUTO-CALIBRATION AND WHEEL CENTERING
512
1
0
03-09-2018 - CHECKING AND RESETTING THE RACING WHEEL'S CENTER VALUE Checking the racing wheel's center value: - On PC, access the Control Panel, then adjust the rotation angle to 1080°. - Place your ra... -
How do you reduce the force feedback in games other than Gran Turismo Sport such as Assetto Corsa?
400
0
0
30-11-2018 - General information concerning racing wheels and games: Please be aware that the way in which the products respond and behave is directed exclusively by the way in which the game is scripted by the ga... -
My T300 Racing Wheel randomly disconnects
305
3
4
16-03-2017 - If your T300 Racing Wheel randomly disconnects/ loses power when used with your PlayStation 3/ PlayStation 4/ PC, please make sure that the power cable is plugged in correctly at the back of the wheel... -
How to remove the detachable wheel
263
0
0
20-03-2017 - How to remove the detachable wheel in order to install a different one: https://www.youtube.com/watch?v=I7cKX6F1ah0... -
AUTO-CALIBRATION AND WHEEL CENTERING
192
1
0
14-09-2018 - CHECKING AND RESETTING THE RACING WHEEL'S CENTER VALUE Checking the racing wheel's center value: - On PC, access the Control Panel, then adjust the rotation angle to 1080°. - Place your ra... -
Order of the wires inside the T300RS pedal set connector
159
0
2
20-03-2017 - Specifications of the pedal set connector: RJ12/6 plug with offset lug Pedal set connector, order of the wires (BLUE, YELLOW, GREEN, RED, BROWN, WHITE): ... -
BOOTLOADER METHOD: how to wake your racing wheel if it is no longer recognized on PlayStation®3, PlayStation®4 or PC
74
0
0
05-10-2018 - (in the event of a loss of firmware) (Windows 7 / 8 / 8.1 / 10) On PC, the USB sliding switch on the base of the T300 RS racing wheel must always be set to the PS3 position! 1. If this ha... -
How can I verify the T300 RS / T300 Ferrari GTE is correctly installed on my computer?
72
0
0
13-07-2018 - First, ensure the USB selector switch on the T300 RS base is set to PS3. Once connected and installed using the latest driver, the wheel should normally be enumerated under Device Manager. ... -
TWO IMPORTANT REMARKS ABOUT STEERING WHEELS ON PS4™
68
0
0
13-07-2018 - Two important remarks to avoid some Force Feedback or calibration issues in PlayStation®4 games # REMARK No.1: On your PS4™ system, DISABLE the KEEP APPLICATION SUSPENDED... -
NOTE REGARDING COOLING FAN OPERATION AND MOTOR COOLING
59
0
0
13-07-2018 - The wheel’s cooling system is composed of a heat sink and a fan. A thermostat monitors the wheel’s internal temperature. T... -
Instructions on how to manually change the wheel's angle of rotation on PlayStation®3/ PlayStation®4 in Force Feedback games.
58
0
1
03-09-2018 - The T300 / T150 racing wheel and the relevant SDK (Software Development Kit) are issued to major PlayStation®3/PlayStation®4 game development studios to ensure full compatibility with forthcoming re...