ESWAP X PRO CONTROLLER
Product number : 4460174
Warning
Please make sure you have the latest firmware version installed. If the latest version is not installed, follow the instructions below.
To perform the firmware update:
- Click on the "Software" menu below, then download and install the ThrustmapperX software from the Microsoft Store.
- Once installed, the ThrustmapperX software will automatically open. Follow the instructions on the Settings page to update your controller to the latest firmware version..
Manual
Licenses
|
“Xbox”, “Xbox One” and “Xbox Series X|S” are a registered trademarks of Microsoft Corporation. |
|
Immersion® - Incorporates sofware licensed from Immersion Corporation. |
Knowledge base
-
Is my ESWAP X PRO CONTROLLER compatible with the new Xbox Series X|S consoles?
22-11-2022 - ESWAP X PRO CONTROLLER is compatible with the following Xbox console versions: Xbox OneXbox One S / Xbox One XXbox Series X|S ...
-
How can I download the ThrustmapperX software for my ESWAP X PRO CONTROLLER? On your PC (Windows 10):
22-11-2022 - On your PC (Windows 10): Open the Microsoft Store, search for ThrustmapperX and install the software on your PC, or else visit: https://www.microsoft.com/en-us/p/thrustmapperx/9p3sr9k3v8nr?rtc...
-
How can I update my ESWAP X PRO CONTROLLER?
22-11-2022 - To get the most out of your ESWAP X PRO CONTROLLER, we strongly recommend that you update the gamepad the first time it is used, and always keep it up to date via the ThrustmapperX software on PC (Wi...
-
My ESWAP X PRO CONTROLLER gamepad doesn’t work well on Xbox.
22-11-2022 - Make sure that you have the latest updates for your ESWAP X PRO CONTROLLER. If necessary, update the gamepad the first time it is used. How can I update my gamepad? ...
-
Can I use the Thrustmapper software with my ESWAP X PRO CONTROLLER?
22-11-2022 - No. To modify the settings for your ESWAP X PRO CONTROLLER, you must use the dedicated ThrustmapperX software (and not Thrustmapper) available on the Microsoft Store. https://www.microsoft.com/en-...
-
Can I use the ThrustmapperX software with my ESWAP PRO Controller?
22-11-2022 - No. To modify the settings for your ESWAP PRO Controller, you must use the dedicated Thrustmapper software (and not ThrustmapperX) available on the following website: https://eswap.thrustmaster.c...
-
The microphone of the headset connected to my ESWAP X PRO CONTROLLER doesn’t work.
22-11-2022 - 1 - Make sure that your headset is properly connected to your ESWAP X PRO CONTROLLER. 2 - Make sure that your headset’s microphone is not muted. Press the MIC button: a. If the left-hand LED (pr...
-
How can I modify the mapping of the buttons on the back of the ESWAP X PRO CONTROLLER gamepad, without going through the ThrustmapperX software?
22-11-2022 - A. Select the profile to be modified, then press the MAP button. The profile selection LED flashes. B. Press and hold down the button that you want to modify (1, 2, 3 or 4). C. Press th...
-
How many volume adjustment levels are available on the ESWAP X PRO CONTROLLER?
22-11-2022 - When you are using a headset connected to your ESWAP X PRO CONTROLLER, ten volume adjustment levels are available. ...
-
How can I restore the factory default settings for my ESWAP X PRO CONTROLLER gamepad, without going through the ThrustmapperX software?
22-11-2022 - Press and hold down the button for the profile that you want to restore to the default settings, until the two profile LEDs flash (for approximately 10 seconds); then release the button. ...
-
Which module configurations are supported by the ESWAP X PRO CONTROLLER?
22-11-2022 - The configurations shown below have been approved and tested by Thrustmaster. You can customize the settings for your ESWAP X PRO CONTROLLER with these configurations. Important: Make sure tha...
-
My mini-stick drifts when in the central position. How can I reduce this drift?
01-10-2023 - Products: Eswap S Pro Controller, Eswap X Pro Controller Platforms required:PC running Windows® 10 or more recent.Game consoles: Xbox One™, Xbox Series S™, Xbox Series X™ If your mini-stick h...