드라이버의 최신 버전인 1.50이 설치되어 있는지 확인하십시오. 설치되지 않은 경우 아래 지침을 따르십시오.
1.드라이버 및/또는 THRUSTMAPPER 소프트웨어 설치하기
PC(Windows 10/11)에서 ESWAP PRO CONTROLLER를 사용하려면 이 단계를 따라야 합니다.
“드라이버” 메뉴를 클릭한 후, 빨간색 네모(오른쪽)에서 하얀색 화살표 기호를 클릭하여 “Package 2020_eSwap_2.exe” 파일을 다운로드하십시오. 사용하는 웹 브라우저에 따라 파일을 즉시 실행하거나 저장하게 됩니다. 파일이 저장되는 경우, 대상 폴더(파일 저장 후)로 이동하여 다운로드한 파일을 실행합니다. 다운로드가 완료되면 “Package 2020_eSwap_2.exe” 파일을 더블 클릭한 후 설명을 따르십시오.
비고:
이 제품은 드라이버와 THRUSTMAPPER 소프트웨어를 동시에 설치합니다.
제품의 드라이버 패키지가 컴퓨터에 이미 설치되어 있는 경우, 새 패키지를 설치하면 먼저 기존 버전의 드라이버가 삭제됩니다. 그런 다음 새 패키지를 다시 실행해야 새 버전을 설치할 수 있습니다.
소프트웨어 사용 및 구성 관련 내용은 “매뉴얼” 섹션에서 “Thrustmapper Software – User Manual”매뉴얼 파일을 다운로드하여 확인하시기 바랍니다.
- Windows 10 This driver package is compatible with this device:
- eSwap Pro Controller Included in this package:
- eSwap Pro Controller driver- Firmware update for eSwap Pro Controller: v7.69- Thrustmapper software v1.4 Installation procedure: 1- Download the eSwap Pro Controller driver package:
- Create a folder for all your Thrustmaster downloads: right-click the Windows desktop, then point to New/Folder.- Name the folder Thrustmaster Downloads.- Click the download link.- A File Download dialog box appears. Click Save.- A Save As dialog box appears. Select the Thrustmaster Downloads folder you have created and then click Save. 2- Once the download is complete, double-click the installation (.exe) file to proceed with the installation:
- When the Windows Security warnings appear, simply click Install to proceed.- You will then be asked to connect the eSwap Pro Controller. Once the devices are connected to the computer, click Next to complete the installation. 3- Following these instructions proceed to the Firmware update of the eSwap Pro Controller components: http://ts.thrustmaster.com/download/pub/webupdate/eSwap/eSwap_Firmware_Update_Process.pdf
- Windows 10/ 11 This driver package is compatible with this device:
- eSwap Pro Controller Included in this package:
- FIRMWARE v8,06: Added support of ESWAP LED BLUE CRYSTAL PACK and ESWAP LED ORANGE CRYSTAL PACK- THRUSTMAPPER v1.6: Added export/import preset function- THRUSTMAPPER v1.6: Added minis-stick square dead-zone option Change in package 2020_eSwap_1:
- Firmware update for eSwap Pro Controller: v7.77 Changes in package 2019_eSwap_2:
- THRUSTMAPPER v1.5: Added multiple languages support (ES, RU, ZH, KO, JP)- THRUSTMAPPER v1.5: Buttons M1-M4 can be deactivated- THRUSTMAPPER v1.5: Added user manual Installation procedure: 1- Download the eSwap Pro Controller driver package:
- Create a folder for all your Thrustmaster downloads: right-click the Windows desktop, then point to New/Folder.- Name the folder Thrustmaster Downloads.- Click the download link.- A File Download dialog box appears. Click Save.- A Save As dialog box appears. Select the Thrustmaster Downloads folder you have created and then click Save. 2- Once the download is complete, double-click the installation (Package 2020_eSwap_2.exe) file to proceed with the installation. **NOTE**: If a driver package for your product is already installed on the computer, running the package installation once will actually uninstall the previous version. It will then be necessary to run it again to proceed to the installation of the new version.
- When the Windows Security warnings appear, simply click Install to proceed.- You will then be asked to connect the eSwap Pro Controller. Once the devices are connected to the computer, click Next to complete the installation. 3- Next, open THRUSTMAPPER, then click the SETTINGS icon and follow the instructions: