Предупреждение
IF THE PEDAL SET IS CONNECTED TO A NON-DIRECT-DRIVE THRUSTMASTER RACING WHEEL BASE VIA THE RJ12 PORT
= T150 / TMX / T128 / T248 / T248-R / T300 / TX / T-GT / T-GT II / TS-XW / TS-PC RACER
In this case:
# No firmware update for the pedal set is required.
# The racing wheel base must be set to T3PA mode (not T-LCM mode).
# Use the Thrustmaster Raceline LC Tools software (v2.55) available in the Software section to modify the calibration of the LC (Load Cell) brake pedal
Notes:
- With this software, the pedal set must be connected via USB directly to the PC (the RJ12 cable must be disconnected from the racing wheel base).
The applied calibration is saved in the pedal set’s internal memory and is therefore functional (whether on PC or consoles) once the pedal set is connected via RJ12 to the racing wheel.
- It is not possible to modify the calibration of the gas or clutch pedals.
IF THE PEDAL SET IS CONNECTED TO A THRUSTMASTER T598 DIRECT DRIVE RACING WHEEL BASE VIA THE RJ45 PORT (DIO PORT)
= T598 (but not T818)
In this case:
# It is imperative to update the firmware of the pedal set and the T598 base:
- Raceline LC (Load Cell) pedal set: Firmware v2.53 (*)
- T598-P: Firmware v3.08
- T598-X: Firmware v1.60
(*) : The Raceline LC firmware update can be performed (via My Thrustmaster Panel) with the pedal set connected via RJ45 to the T598 or with the pedal set connected via USB to the PC.
# The pedal set is is recognized with the name TRLP-LC on the T598 screen, in the PEDAL SET tab.
# Adjust the pedal set parameters (MIN / MAX / CURVES / ...) via the T598 screen (in TRLP-LC tab) or using the My Thrustmaster Panel software (available in the Software section).
Calibration via the screen can be performed directly within games, whether on consoles or on a PC.
The applied calibration is saved in the pedal set’s internal memory.
Note
- If the pedal set is connected via USB (directly to the PC), the RJ45 cable must be disconnected from the T598.
- The pedal set cannot be connected to a T818 base via RJ45.
IF THE PEDAL SET IS CONNECTED TO A THRUSTMASTER T818 DIRECT DRIVE RACING WHEEL BASE OR TO A NON-THRUSTMASTER RACING WHEEL BASE VIA USB
In this case:
# It is imperative to update the firmware of the pedal set and the T598 base:
- Raceline LC (Load Cell) pedal set: Firmware v2.53
# Use the My Thrustmaster Panel available in the Software section to adjust the pedal set parameters (MIN / MAX / CURVES / …).
The applied calibration is saved in the pedal set’s internal memory.
Подробнее
Инструкция по эксплуатации
Программное обеспечение
My Thrustmaster Panel [VERSION: 1.3.234.0] PC
Примечания к выпуску - My Thrustmaster Panel [VERSION: 1.3.234.0]
• Supported devices: T248R, T598X, T598P, T818, Raceline LC
* NEW: [APPLICATION VERSION: 1.3.234.0]
== Hot-Fix
• T248R show in HOMEPAGE in any condition
* NEW: [APPLICATION VERSION: 1.3.230.0]
== New feature:
• Add Raceline LC support in USB
• Add Raceline LC support in DIO / RJ45 (with the T598 base only)
• Add Raceline LC user Journey with TTRS Drivers support
• Add EVO Levers Support
• Add Formula Wheel Add-On Ferrari SF25 Edition Support
• Add Formula Wheel Add-On Ferrari SF1000 Edition Firmware Update process
== Improvement:
• App behaving when outdated component is founded.
• Improved global firmware update process.
• GT Wheel add-on UI.
• Toast notification Rework.
== Know issues:
• Wheel Rims connected might not refresh until Wheel base is restarted while the app is open.
• UI - Can be incorrect in 4K with 200% Windows scale.
• My Thrustmaster Panel automatically reboots after firmware update.
• SF1000 Wheel Add On could be display instead of the attached wheel add on.
• SF25 can be show as SF1000 before Firmware update.
• SF1000 Firmware version is not showing.
• T598 - Can be shown with Firmware version 1.80 when no drivers are installed.
• T598X - Gear Jolt & Engine Roar can cause issue in the forcefeedback effect.
• SPORTCAR Wheel rims can show incorrect firmware version as 58.233.
• T248R Auto center Slider can be moved to 0% in certains conditions.
• Weblink are not localized.
== Bug Fix:
• SF1000 Wheel Add On flickering on HOMEPAGE screen.
• Various UI Fixes.
• Various Tooltips correction.
* NEW: [APPLICATION VERSION: 1.2.143.0]
== New feature:
• Add T818 7.39 Firmware Support: New Settings & Pattern lighting modes.
• Add Hypercar Wheel Add On firmware process & update support.
== Improvement:
• Reworked T818 Presets module.
• New UI for Links page.
• Improved presets prompt to handle T818 external settings changes.
• Improved notifications for available updates with connected devices.
== Know issues:
• Wheel Rims connected might not refresh until Wheel base is restarted while the app is open.
• UI - Can be incorrect in 4K with 200% Windows scale.
• My Thrustmaster Panel automatically reboots after firmware update.
• SF1000 Wheel Add On could be display instead of the attached wheel add on.
• T598 - Can be shown with Firmware version 1.80 when no drivers are installed.
• T248R Auto center Slider can be moved to 0% in certains conditions.
• Weblink are not localized.
• T598 wording is used instead of T818 for Wheel rim firmware update warning.
== Bug Fix:
• SF1000 Wheel Add On flickering on HOMEPAGE screen.
• Various UI Fixes.
* NEW: [APPLICATION VERSION: 1.1.134.0]
== Hot-Fix
• SPORTCAR Wheel Rim firmware update fix
* NEW: [APPLICATION VERSION: 1.1.133.0]
== New feature:
• Add T248R Support.
• Add T598 Xbox version Support.
• Add SPORTCAR Wheel Rim Firmware update support when connected to a T598 servo base.
== Improvement:
• New Settings categories page layout.
• New UI for Overview, Settings and Testing page.
• Improved Firmware update process when bootmode not correctly engaged.
• Improved notifications for available updates with connected devices.
== Know issues:
• Wheel Rims connected might not refresh until Wheel base is restarted while the app is open.
• UI - Can be incorrect in 4K with 200% Windows scale.
• My Thrustmaster Panel automatically reboots after firmware update.
• SF1000 Wheel Add On could be display instead of the attached wheel add on.
• T598 - Can be shown with Firmware version 1.80 when no drivers are installed.
• Weblink are not localized.
• T248R Auto center Slider can be moved to 0% in certains conditions.
== Bug Fix:
• T818 - Two device instead of one can be seen at first start-up of the app.
• Various UI Fixes.
* NEW: [APPLICATION VERSION: 1.0.518.0]
== Hot-Fix
• Firmware Recovery Update - Only the latest firmware available is now downloaded
• Firmware Update - Device Bootmode verification logic is improved to minimize waiting time
• Ferrari 488 GT3 & EVO racing HUB - Firmware Update now show properly the update progress.
* NEW: [APPLICATION VERSION: 1.0.514.0]
== New feature
• Add T598 SETTINGS page.
• Add T818 Support.
• Add T818 Presets settings (D, 1, 2, 3).
== Improvement
• New prompt to inform My Thrustmaster Panel will reboot after firmware update.
• New T598 HD illustration.
• New REFRESH prompt & logic on HOMEPAGE.
• New update logic flow as the Drivers is updated before the firmware.
• Updated TM Firmware updater.
== Know issues:
• UI - Can be incorrect in 4K with 200% Windows scale.
• My Thrustmaster Panel will automatically reboot after firmware update.
• SF1000 Wheel Add On could be display instead of the attached wheel add on.
• T598 - Can be shown with Firmware version 1.80 when no drivers are installed.
• T818 - Two device instead of one can be seen at first start-up of the app.
• Weblink are not localized.
== Bug Fix
• EVO racing HUB - Update instructions are localized.
• EVO racing HUB - Support webpage link Added.
• Ferrari 488 GT3 - No longer display EVO racing HUB device.
• Hypercar Wheel Add On - Support webpage link Added.
• SF1000 Wheel Add On - Correct Firmware version is now showing.
• SF1000 Wheel Add On - App no longer close when use "Set center".
• Ferrari F1 Wheel - Added button 18-19-20-21 on TESTING screen.
• T598 - In Blue mode and without any drivers install now only show 1 device.
• T598 - Buttons layout for TM Open Wheel Add On and Ferrari 488 Challenge add on in TESTING screen.
• It is impossible to cancel the checking for only 1 device right before performing a firmware update.
• The REFRESH button will update the FW Updater when a wheel is connected via USB.
• Various UI fixes.
* OLD: [APPLICATION VERSION: 1.0.326.0]
== New feature
• Wheel Rims firmware update from My Thrustmaster Panel.
• Add Recovery Mode to open firmware updater from My Thrustmaster Panel.
== Improvement
• Add firmware version verification in the Wheel Rim page.
• Add firmware Updater shortcut in the Wheel Rim update process.
• Possibility to see device in bootmode in the HOMEPAGE.
== Know issues:
• My Thrustmaster Panel will automatically reboot after firmware update.
• Device are shown in the HOMEPAGE only after hitting "REFRESH" button.
• Weblink are not localized.
• SF1000 Wheel is shown randomly instead of the correct wheel add on.
• SF1000 Wheel Add On firmware version is not showing or incorrect value.
• Ferrari F1 Wheel: Missing button 18-19-20-21 on Testing Tab.
• Hypercar Wheel Add On don't have support webpage link.
• Extra EVO Racing HUB can be displayed when plugging the USB cable into Ferrari 488 GT3 or Evo Racing Addon.
• EVO racing HUB update instructions are not localized.
• EVO racing HUB don't have support webpage link.
• The refresh button will update the FW Updater when a wheel is connected via USB.
• UI - When in TESTING page and connecting a ID shared wheel Rim (ID=4) all wheels are displayed.
• UI - can be incorrect in 4K with 200% Windows scale.
• T598 - Visual error appearing when booting the title with no drivers for a very short moments.
• T598 - Minor issue with the buttons layout for TM Open Wheel and Ferrari 488 Challenge addons in Testing Page.
• T598 - Can be shown with incoherent Firmware version 1.80 when no drivers are installed.
• T598 - Settings are not yet adjustable in My Thrustmaster Panel.
• T598 - in blue mode and without any drivers install can show 2 unknown devices instead of 1.
== Bug Fix
• Firmware Updater fix that prevent to update T598 for some users.
• Firmware Updater fix that return "Oops somethings went wrong!"
• Removed T818 support as it is not supported correctly in this app. BETA version must still be use for T818.
• Various UI fixes.
• Localized all the contents.
* OLD: [APPLICATION VERSION: 1.0.227.0]
== Release version
== Know issues:
• T598 Settings are not yet adjustable in My Thrustmaster Panel.
• SF1000 wheel is shown randomly instead of the correct wheel add on.
• My Thrustmaster Panel may not re-open right after closing it.
• My Thrustmaster Panel will automatically reboot after firmware update.
• When using the "SET CENTER" feature, the value display may be -1° instead of 0°.
• T598 can be shown with incoherent Firmware version 1.80 when no drivers are installed.
• Device are shown in the HOMEPAGE only after hitting "REFRESH" button
• In some configuration, the TESTING page may close the app
• "Coming Soon!" message is not localized.
• Double click on "REFRESH" close the app.
• Unable to start again the app shortly after closing it.
• With T598 in blue mode and without any drivers install can show 2 unknown devices instead of 1.
• Weblink are not localized.
• Wheel rims version show no icon once up to date.
• SF1000 Wheel Add On firmware version is not showing or incorrect value.
• 488 GT3 Wheel Add On update instructions are not localized.
• Hypercar Wheel Add On update instructions are not localized.
• Hypercar Wheel Add On don't have support webpage link.
• EVO racing Hub update instructions are not localized.
• EVO racing Hub don't have support webpage link.
Thrustmaster Raceline LC Tools software (v2.55)PC
Русский 
Français
English
Deutsch
Español
Italiano
Nederlands
Português
中文 (中国)
한국어
日本語
Svenska
