86
0
0


Related informations :
  • KB : 5789
  • Language : EN
  • Date : 2018-11-02
  • Category : HOW TO
  • Tag : CALIBRATION , FIRMWARE , START , TURN ON
Related products :
  (i.e. in the event of firmware loss) Required system: PC running Windows® 7, 8 or 10. 1) If you haven’t already done so, install the DRIVERS FORCE FEEDBACK package on your PC. You can download it here: https://support.thrustmaster.com/en/product/t-gt-en/ During the installation: - DO NOT CONNECT the racing wheel to the PC before being requested to do so. - Connect the racing wheel directly to the PC’s USB port. We advise against using a USB hub during this procedure. - DO NOT CLICK on any windows that may appear during the update. 2) Restart the computer. 3) After restarting the computer: - Remove the USB plug from the computer. - Simultaneously press buttons L3 and R3 (located on the racing wheel’s base), then connect (without releasing L3 and R3) the USB plug to the PC. - After connecting the USB plug to the PC, release buttons L3 and R3. - The following message appears in the lower right-hand corner of your screen (do not do anything or click on any window during the automatic installation procedure). - After the installation, a second message appears: Your racing wheel’s bulk drivers are now installed. Notes: - During the installation, the racing wheel does not run the auto-calibration procedure (i.e. the racing wheel does not automatically move to the left and right) when connected to the PC: this is normal. - The racing wheel’s MODE LED is off: this is normal. - The racing wheel is not detected in the Control Panel: this is normal. - The racing wheel is detected in the Device Manager, in the Sound, video and game controllers section, under the name Thrustmaster T-GT Bulk Driver: this is normal. Thrustmaster T-GT Bulk Driver   4) Select Start > All Programs > Thrustmaster > FFB Racing Wheel, then click Firmware Update. 5) The Thrustmaster – Firmware Updater window appears onscreen. - The Device field shows [BOOT] T-GT – Firmware:.... - The Firmware field displays the firmware version that will be applied to the device. Note: If nothing appears in the Device or Firmware fields, please repeat the installation procedure from the beginning, connecting the racing wheel’s USB plug to another USB port on the PC (or try running the procedure on another PC). 6) Click OK to update the firmware. IMPORTANT: DO NOT DISCONNECT the racing wheel from the USB port! DO NOT DISCONNECT the racing wheel’s power adapter during the firmware update! The firmware updater will inform you if the update procedure ran successfully. The racing wheel then runs the auto-calibration procedure (i.e. the racing wheel automatically moves to the left and right), then the MODE LED lights up again. 7) Click OK to return to the firmware updater main window, then click to exit the program. 8) Once the firmware has been updated, check that the racing wheel is running correctly in the Control Panel (Start > All Programs > Thrustmaster > FFB Racing Wheel > Control Panel). - The racing wheel appears under the name Thrustmaster T-GT Racing Wheel. - Click Properties to test the racing wheel.   You are now ready to race! Note: If the procedure fails, please repeat the installation procedure from the beginning, connecting the racing wheel’s USB plug to another USB port on the PC (or try running the procedure on another PC). If the problem remains, please contact Technical Support, who will then provide other solutions.